Learning More About Furnaces In New Haven, IN

by | Jun 11, 2018 | Heating and Air Conditioning

Consumers who are replacing Furnaces in New Haven IN need to do some homework. It is a good idea to learn what type of furnace is the most energy-efficient. To that end, get a consultation from a heating and air contractor. They will come out to the home, inspect the existing unit and make some recommendations.

Single Stage Furnaces

There are three different types of Furnaces in New Haven IN. The most common type of furnace is the single stage type. The “stage” language refers to what type of burner and valve a furnace has. The basic single stage furnace has a valve with two positions, open and closed. When the valve is open, fuel goes to the pilot light to operate the oven and furnace. A single stage unit generally burns on natural gas or propane. The disadvantage to this type of furnace is that it is difficult to regulate the temperature.

Advantages Of Two Stage Furnace

Two-stage furnaces have three positions to the valve: closed, partially open and full open. The partially open and full open translate to low heat and high heat. Of course, this furnace uses technology to recognize the temperature outside and inside. The furnace’s control board opens the valve partially on milder days and it fully opens when it is very cold.

Two-stage furnaces are more energy-efficient and help lower the heating bill. Indeed, two-stage models use 60-percent less energy that the single stage counterpart. Further, a two stage furnace heats more evenly. Single stage furnaces come on and heat the house quickly before turning off. Heat does not always travel throughout the home.

Modulating Furnaces

Modulating Variable Speed Furnaces regulate the amount of energy used based on the desired temperature. Experts say this is the most energy-efficient furnace. Further, the fan in the furnace operates when the heat is off. Therefore, the fan circulates air on a regular basis.

Basically, modulating furnaces keep the temperature consistent. On the downside, modulating variable speed units are the most costly type of furnace. However, the consumer saves money on energy bills if they stay in the house for several years. For more information, contact Brockman Heating & Air Conditioning.

Recent Posts

Categories

Archive

Related Posts